- Lundi 8:00AM - 5:00PM
- mardi 8:00AM - 5:00PM
- Mercredi 8:00AM - 5:00PM
- jeudi 8:00AM - 6:00PM
- vendredi 8:00AM - 6:00PM
- samedi Fermé
- dimanche Fermé
Performance Voyer possède l'une des meilleure installation d'entreposage intérieur et extérieur. Soyez tranquille en sachant que votre bateau, moto ou VTT est à l'abri des éléments tout au long de l'hiver.
Tous les bateaux hivernisés et/ou stocké avec Performance Voyer passe par une liste de contrôle à l'arrivée et au départ pour s'assurer que tout, de la proue à la poupe, a été inspecté et est en bon état de fonctionnement.
Prenez soin de votre embarcation hors saison
Pendant l’hiver, confiez-nous votre bateau — on s’en occupe comme si c’était le nôtre. Entretien, protection, inspection : tout est pris en charge.
👉 Contactez-nous pour réserver votre place
Dès son arrivée, votre embarcation est nettoyée avec des produits marins haut de gamme.
✅ Coque et quilles propres
✅ Fait avec soin par notre équipe
Protégez votre moteur et vos systèmes du froid :
Vidange & changement d’huile (moteur, transmission, pied)
Stabilisateur d’essence
Antigel dans tous les circuits (vivier inclus)
Vérification batterie et composantes clés
Inspection moteur, hélice, embrayage
💡 Même peu utilisé, un moteur reste exposé à l’humidité — l’hivernisation est essentielle.
🧊 Intérieur
✔ À l’abri des intempéries
✔ Entrepôt ventilé et sécurisé
✔ Prêt à repartir dès le printemps
🌨️ Extérieur
✔ Enveloppé dans une pellicule protectrice
✔ Absorbeurs d’humidité inclus
✔ Espace clôturé et surveillé
On vient chercher votre embarcation et on vous la rapporte au printemps.
Aucune logistique à gérer — on s’en occupe.
👉 Demandez votre soumission maintenant
Réservez votre remise en marche (délai de 7 à 14 jours) :
Test système de charge & pompes
Analyse des huiles
Graissage & ajustements
Vérification complète de la remorque
Offrez-lui un nettoyage complet avant son retour à l’eau :
✅ Plancher
✅ Sièges
✅ Console & cockpit
📞 Contactez-nous pour un service sur mesure
Profitez de la saison froide pour faire inspecter, réparer ou entretenir votre embarcation.
The GGB Trail muffler is constructed from 304 stainless steel and is a direct bolt on muffler that gives a deep tuned exhaust note, close to stock dB levels in the mid and high RPMs and does not require a fuel programmer. The Trail Muffler provides an increase in exhaust flow resulting in 1-3 HP gain with increased torque. Each system is a direct bolt-on fit and allows all factory body panels to be re-installed. Submersion in mud and water will not affect the integrity or the performance of the GGB Trail muffler as its fully welded stainless steel design with ZERO packing is built to withstand the punishment. The GGB Trail muffler is a direct bolt-on, zero maintenance exhaust system that can be run with or without a programmer. The Trail Series will easily meet J1287 sound regulation of 96dBA. This muffler has been SPECIFICALLY designed for this machine, tested and tuned accordingly to provide optimal exhaust flow and back pressure to allow the engine to efficiently achieve peak power with the stock programmer. There is NO DRONE with our Trail Muffler. The Trail Muffler has an incredible tuned sound to it. Slightly louder than stock at idle for that head turning start up. As the RPMs increase the Trail Muffler reduces sound, keeping measured dB levels close to stock through the middle and upper RPM range while providing a deep tuned exhaust note from idle to wide open throttle. Our design allows for reduced operating temperatures and weight savings compared to stock. In hand you will notice the build quality and fit and finish of the product we deliver, and installation is straight forward as each system is a direct bolt-on using factory mounts and all necessary hardware is included.