- Lundi 8:00AM - 5:00PM
- mardi 8:00AM - 5:00PM
- Mercredi 8:00AM - 5:00PM
- jeudi 8:00AM - 6:00PM
- vendredi 8:00AM - 6:00PM
- samedi Fermé
- dimanche Fermé
Performance Voyer possède l'une des meilleure installation d'entreposage intérieur et extérieur. Soyez tranquille en sachant que votre bateau, moto ou VTT est à l'abri des éléments tout au long de l'hiver.
Tous les bateaux hivernisés et/ou stocké avec Performance Voyer passe par une liste de contrôle à l'arrivée et au départ pour s'assurer que tout, de la proue à la poupe, a été inspecté et est en bon état de fonctionnement.
Prenez soin de votre embarcation hors saison
Pendant l’hiver, confiez-nous votre bateau — on s’en occupe comme si c’était le nôtre. Entretien, protection, inspection : tout est pris en charge.
👉 Contactez-nous pour réserver votre place
Dès son arrivée, votre embarcation est nettoyée avec des produits marins haut de gamme.
✅ Coque et quilles propres
✅ Fait avec soin par notre équipe
Protégez votre moteur et vos systèmes du froid :
Vidange & changement d’huile (moteur, transmission, pied)
Stabilisateur d’essence
Antigel dans tous les circuits (vivier inclus)
Vérification batterie et composantes clés
Inspection moteur, hélice, embrayage
💡 Même peu utilisé, un moteur reste exposé à l’humidité — l’hivernisation est essentielle.
🧊 Intérieur
✔ À l’abri des intempéries
✔ Entrepôt ventilé et sécurisé
✔ Prêt à repartir dès le printemps
🌨️ Extérieur
✔ Enveloppé dans une pellicule protectrice
✔ Absorbeurs d’humidité inclus
✔ Espace clôturé et surveillé
On vient chercher votre embarcation et on vous la rapporte au printemps.
Aucune logistique à gérer — on s’en occupe.
👉 Demandez votre soumission maintenant
Réservez votre remise en marche (délai de 7 à 14 jours) :
Test système de charge & pompes
Analyse des huiles
Graissage & ajustements
Vérification complète de la remorque
Offrez-lui un nettoyage complet avant son retour à l’eau :
✅ Plancher
✅ Sièges
✅ Console & cockpit
📞 Contactez-nous pour un service sur mesure
Profitez de la saison froide pour faire inspecter, réparer ou entretenir votre embarcation.
As featured by Dirt Trax Television, RMSTATOR SPLYT Technology provides a reliable solution to well-known charging system failures. Using a dual output stator with two completely separate stator windings, this system splits the power generated by the stator into two separate voltage regulators. These regulators then each operate with only half of the load of the original system, allowing them to maintain a lower temperature and increase reliability.
SERIES Voltage RegulationThis system uses a new type of voltage regulator called a SERIES regulator. Rather than shunting excess power to ground like a typical regulator, it protects the battery from high voltage by disconnecting the stator coils from the regulator and preventing current from passing on. This type of voltage regulation generates less heat because current from the stator is prevented from flowing through the regulator.
Ultimate reliabilityWith a stock charging system, voltage regulators are consistently operating within 5% of their maximum capacity, leading to heat and stress related failure. With the RMSTATOR SPLYT system, both SERIES voltage regulators are operating with 40% overhead for long life and stable output.
Better designContrary to the original OEM stator that uses one three phase stator winding, the SPLYT stator contains two completely separate three-phase coil windings. Each of these two windings then produces half of the power of the stock stator lowering the temperature in each individual coil.
Easy to installAll parts use a Plug-and-Play design, just like the original OEM ones, so no special tool or knowledge is needed to install this system.
Harnesses includedRelocation wiring harnesses allow to relocate the regulators anywhere on your vehicle to get better air flow and easier access.
This kit includes: